Connecting Peripheral Devices 5-1
Connecting
Peripheral Devices
You can connect peripheral devices, like a printer or an
external monitor, to the NEC Docking Station 4000 for use
when the NEC Versa is docked. Ports for connecting
devices are found on the back of the docking station.
Before using peripheral devices, make sure the system
parameters match the system configuration set with your
NEC Versa setup utility (also called the ACU). Parameters
and configuration files are discussed in Chapter 3, Setting
Up and Using the Software.
External options that you can connect include the following:
n External monitor
n External keyboard and mouse
n External audio peripherals, including:
Headphone and external speakers
Microphone
External sound sources connected to the Line In or
Line Out port
n Parallel devices such as printers
n Serial devices such as an external modem
n External SCSI devices such as a scanner.
5
To Next Page
Loading...