2-2 Docking/Undocking the NEC Versa
Connecting the Power Cable
Follow the instructions given next in the order presented to
get your NEC Versa and docking station up and running.
Connect the AC power cable to the docking
station and AC power before docking the computer.
The power cable that came with the docking station pro-
vides power to the docking station and the NEC Versa.
Connect the docking station power cable as follows.
1. Position the docking station on a flat surface close to an
AC outlet.
2. Attach one end of the cable to the AC power port on the
docking station.
3. Attach the other end to a properly grounded wall outlet.
Connecting the power cable
To Next Page
Loading...