3-22 Setting Up and Using the Software
QUICK START
Follow the instructions given here if you are already
familiar with software setup programs and the NEC Versa
family of computers.
Run the Docking Station 4000 Setup utility as follows.
1. Dock your NEC Versa on the Docking Station 4000 and
power on. (See Chapter 2 for docking instructions.)
2. Boot into Windows.
3. Close any Windows applications that may be running.
4. Insert the first Docking Station 4000 Setup diskette into
the drive.
5. From the Windows Program Manager, access the File
pull-down menu and select Run.
6. Type a:winstall and press Enter or click “OK.”
7. Respond to the utility as prompted.
8. When Setup is complete, reboot your system when
prompted.
For some systems, the Setup utility only loads the online
docking station user’s guide.
If you want to load the ESS drivers for any reason, insert
audio diskette 1 into the drive. From the Windows File
menu, select the Run command. Enter a:setup.exe and
press Enter to load the drivers.
To Next Page
Loading...