2-12 Docking/Undocking the NEC Versa
Eject button and lock location
3. Check the status of the lock. You cannot undock the
NEC Versa if the lock is in the Locked position.
4. Press the Eject button on the front panel of the docking
station.
To use Windows 95 software to undock the NEC Versa,
locate the Eject icon on the screen and click. The soft-
ware puts your NEC Versa into Suspend mode and initi-
ates the undocking sequence.
If the NEC Versa does not eject properly us-
ing the front panel Eject button, go to the next sec-
tion “Emergency Undocking.”
5. Once the connection is broken, pull the NEC Versa for-
ward and remove it from the docking station.
To Next Page
Loading...