Using External Devices 5-5
3.
Align and connect the 9-pin connector with the serial port on the
system. Secure the connection with the screws provided.
4.
Align and connect the other end of the cable to the appropriate port
on the device. Secure the connections with the screws provided.
Connecting a serial device
5.
Connect the power cable to the device and a properly grounded wall
outlet.
6.
Turn on power to the system and the device.
Note:
Make sure your device is online before
trying to print. See the device specific guide for
instructions.
External Keyboard/Mouse
You can add a full-size PS/2-style keyboard or PS/2-style mouse to your
NEC Versa using the Plug and Play feature. The PS/2 style keyboard and
the PS/2 style mouse are warm insertable allowing you to connect the
devices while the NEC Versa is powered on. You can continue to use the
system keyboard and VersaGlide touchpad while an external keyboard
or mouse is connected.
To Next Page
Loading...
