NEC Versa LX - Page 53

3-8 Using the Software
BIOS Setup Parameters
Parameter Default Setting Alternate Setting(s)
2nd Boot Device
6
CDROM Disabled/1
st
Fnd IDE/Floppy
SuperDsk
3rd Boot Device
6
Floppy Disabled/1
st
Fnd IDE/SuperDsk
CDROM
4th Boot Device
6
1
st
Fnd IDE Disabled/Floppy/SuperDsk
CD-ROM
Try Other Boot Devices Yes No
1
st
IDE Hard Drive Internal VersaBay/DS Internal
DS VersaBay
2
nd
IDE Hard Drive VersaBay Internal/DS Internal
DS VersaBay
3
rd
IDE Hard Drive DS Internal Internal/VersaBay
DS VersaBay
4
th
IDE Hard Drive DS VersaBay Internal/VersaBay/DS Internal
Peripheral Setup
Internal Hard Drive Enabled Disabled
USB Controller Disabled Enabled
Serial Port Auto Disabled/(PnP OS Setup
7
)
COM1,IRQ4/COM2,IRQ3
COM3,IRQ4/COM4,IRQ3
Parallel Port Auto Disabled/LPT1/LPT2
(PnP OS Setup
7
)
Parallel Mode ECP Uni-Directional/Bi-Directional
EPP
IR Serial Port Disabled Auto/(PnP OS Setup
7
)
COM2,IRQ3/COM3,IRQ4
COM4,IRQ3
1
These setup items are only visible when system is docked
.
2
Greyed out until supervisor password is set up
.
3
Only active after a password is set up.
4
Available when power savings is set to Custom
.
5
Resume alarm time is selectable when wake up from suspend alarm is set
.
6
Bootable device when set to IDE hard drive. Only one IDE device is bootable
.
7
Appears only when configured by the Windows 98 or Windows 95 device manager.