18
The screen shows the needle plate have
changed from regular one to straight stitch
needle plate, press the memory button and
the stitch width is automatically selected to
middle needle position stitches only.
Make sure that the twin needle is not used
and it is single needle only. Press the memory
button to nish the setting.
n
Attention
To prevent needle breakage or damage the
needle plate, do not use twin needle.
Machine is automatically selected to Direct
Pattern Group number 1 stitch.
Note
A sound will appear warning that the
stitch pattern is not middle needle position
stitches.
v
Straight stitch needle plate
setting
n
Attention
Use the straight stitch needle plate setting
to prevent the needle breakage when
straight stitch needle plate attached.
With straight stitch needle plate attached, long
press the Direct Pattern Group number 1 to
straight stitch needle plate setting.
To Next Page
Loading...
