EasyManua.ls Logo

Necchi C360 - Applique; Fagoting

Necchi C360
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
73
0.5~1.0 3.0~7.0
5
Applique
You can create and applique by cutting a different piece of fabric into a shape and using it
as a decoration.
Fagoting
Stitching across an open seam is called "fagoting". It is used on blouses and children's
clothing. This stitch is more decorative when thicker thread is used.
1
003
Cut out the applique design and baste it on
the fabric. Sew slowly around the edge of the
design.
①
Basting
Trim the excess material outside the stitching.
Make sure not to cut any stitches. Remove
the basting.
Separate the folded edges of the fabric pieces
with a gap of 4mm and baste them onto a
piece of thin paper or water-soluble stabilizer
sheet.
①
4mm
②
Thin paper or water-soluble stabilizer
③
Basting
Align the center of the presser foot with the
center of the two pieces of fabric and begin
sewing.
After sewing, remove the stabilizer and
basting.
Using
the all purpose foot.
Using
the all purpose foot.
2
1
3

Table of Contents

Related product manuals