62
Eyelet stitch
Eyelet stitches are used for making belt holes and other similar applications.
Using
the satin stitch foot.
021
Press the "+" or "-" stitch width adjustment
button to select the eyelet size.
①
Small: 5.0mm
②
Medium: 6.0mm
③
Large: 7.0mm
Lower the needle into the fabric at the
beginning of the stitching, and then lower the
presser foot lifter.
Once sewing is completed, the machine
automatically sews reinforcement stitches,
then stops.
2 31
Make a hole at the center using an eyelet
punch.
* Eyelet punch is not included with the
machine.
Note
- When using the eyelet punch, place thick
paper or some other protective sheet
under the fabric before punching the hole
in the fabric.
- If thin thread is used, the stitching may
be coarse. If this occurs, sew the eyelet
twice one on top of the other.
To Next Page
Loading...
