Necchi C360 - Buttonhole Stitch

55
Buttonhole stitch
Buttonholes can be adapted to the size of the button.
For stretch fabric or thin fabric, it is recommended to use a stabilizer for a better
buttonhole sewing. Slightly reduce upper thread tension to produce better results.
Using the electronic buttonhole foot.
0/011: For thin or medium fabric
014/015: For suits or overcoats
009/013: Heavy-duty buttonholes with vertical
bar tacks
010/012: Reinforced waist tapered buttonhole
016/019: For jeans or trousers
Note
Please use the same fabric of the project
and do a sewing test in advance.
Mark the positions of the buttonhole on the
fabric.
The maximum buttonhole length is 3cm. (Total
of diameter + thickness of button.)
The size of the buttonhole is determined by
the button inserted in the button plate.
Pull the button holder plate to the back, and
place the button in it. Push back the button
holder plate against the button to hold it tight.
①
Button holder plate
Consider the unique shape of each button,
the electronic buttonhole foot allows to adjust
the length and width to t each button. The
buttonhole ne tuning adjuster provides
a precise setting for buttonhole, and the
buttonhole adjustment button allows to adjust
the buttonhole size from Small to Large.
①
Buttonhole ne tuning adjuster
0
013 014 015012011009 010 016 019