Necchi C360 - Page 64

56
The red mark is the standard setting for
regular button, adjust the pointer align with
the red mark.
The buttonhole adjustment button provides a
further range of buttonhole size adjustment.
(Please refer to "Buttonhole adjustment
button" chapter for more information.)
①
Regular button
The buttonhole length may need to be
increased for thick button, adjust the pointer
toward to "+" for ne tuning.
①
Thick button
The buttonhole length may need to be
decreased for thin button, adjust the pointer
toward to "-" for ne tuning.
①
Thin button
Attach the electronic buttonhole foot and plug
the cord into the socket above the presser
foot bar.
The upper thread should be passed through
the hole of electronic buttonhole foot and
bring the upper thread to the front of electronic
buttonhole foot.
①
Cord
②
Socket