60
Darning stitch
Darning a small hole or a tear before it becomes larger can save a garment. Choose a ne
thread in a color as color as close to your garment possible.
024
Baste the upper fabric and the under fabric
together.
①
Basting
The size of one darn cycle is variable.
However, the maximum stitch length is 2.6cm
and the maximum stitch width is 7mm.
①
The length of sewing
②
The width of sewing
③
Star
④
Stop
2
3
1
4
1
Using
the electronic buttonhole foot.
Position the fabric so that the needle is 2mm
in front of the area to be darned, and then
lower the presser foot lifter.
①
2mm
Slightly hold the end of the upper thread and
start sewing.
1
Extend the button holder plate and set to the
desire length. Adjust the stitch width and the
stitch length to the desired width and density.
①
Button holder plate
Attach the electronic buttonhole foot and plug
the cord into the socket above the presser
foot bar.
The upper thread should be passed through
the hole of electronic buttonhole foot and
bring the upper thread to the front of electronic
buttonhole foot.
To Next Page
Loading...
