Necchi C360 - Making a Buttonhole on Stretch Fabrics

58
* Buttonholes are sewn from the front of the presser foot to the back, as shown.
010 011 013
0 009 012
014 015 016 019
017 018 020
017 018 020
v
Making a buttonhole on stretch
fabrics
017: For light to medium weight woven
fabrics.
018: For stretch or woven fabric
020: For stretch fabric
When sewing buttonholes on stretch fabric,
hook heavy thread or cord under the
buttonhole foot.
Attach the electronic buttonhole foot and plug
the cord into the socket above the presser foot
bar. Bring the gimp thread ends to the front of
the foot and insert them into the grooves, then
tie them there temporarily. Lower the presser
foot lifter and start sewing.
Set the stitch width to match the diameter of
the gimp thread.
Once sewing is completed, pull the gimp
thread gently to remove any slack. Cross the
gimp in front of the needle and thread gimp
ends into a large needle, pull to the wrong
side and knot ends before cutting excess.
①
Wrong side
Note
It is suggested that you sew with a stabiliser
material under the fabric.
1