Necchi C360 - Page 57

49
Adjusting distorted stretch stitches
①
Stitches are too compressed, press the "+"
button
②
Stitches in normal situation
③
Stitches are too drawn out, press the "-"
button
Adjusting distorted letters or numbers
①
Letters or numbers are overlap, press the
"+" button
②
Letters or numbers in normal situation
③
Letters or numbers are too far, press the "-"
button
Adjusting the stitch density for iconhole
①
Buttonhole is too dense, press the "+"
button
②
Buttonhole in normal situation
③
Buttonhole is less dense, press the "-"
button
Note
It takes practice on a scrap piece of the
same type of fabric. Please use the same
fabric of the project and do a sewing test in
advance.
3
1 2
3
1 2
3
1 2
Press the pattern group switch button again to
leave stitch balance adjustment mode.