© by N&W GLOBAL VENDING S.p.A. 14 12 2008 3335 00
Chapter 2
INSTALLATION
Installation and any subsequent maintenance op-
and trained on the use of the machine as well as
involve.
The machine is not suitable for outdoor installation,
it must be installed in a dry room at a temperature
It cannot be installed in a room where water jets are
The machine shall be arranged in such a way that
the maximum inclination is not exceeding 2°. If nec-
essary, level it by means of the feet.
MAIN SWITCH
Only the parts protected by covers and highlit by the
Before removing these covers, detach the power
supply cable from the mains.
To power on the installation when the extractable com-
UNPACKING THE VENDING MACHINE
-
children since they are potential sources of danger.
If the vending machine has been laid down during
transportation, wait at least an hour before con-
necting it with the power mains.
PAYMENT SYSTEM ASSEMBLY
The machine is sold without any payment system.
As a consequence, only the installer will be liable
for any damage that may be caused to the machine
or to things and persons by an incorrect installation
of the payment system.
-
-
-
-
- -
tended to open the selector:
Fig 18
Coin slide fastening screw1-
Coin slide2-
Selector opening lever3-
Coin mechanism fastening holes4-
Openable coin mechanism support5-
Coin return slide6-
Coin insert slide7-
To Next Page
Loading...
