© by N&W GLOBAL VENDING S.p.A. 2 12 2008 3335 00
Introduction
The technical documentation supplied is an inte-
gral part of the equipment and it must therefore
accompany the equipment whenever it is either
moved or transferred to enable the various opera-
tors to consult it.
Before starting to install and use the machine, it
is necessary to carefully read and understand the
content of the documentation since it can supply
important information on installation safety, utilisa-
tion rules and maintenance operations.
tH E m a N u a l i s D i v i D E D i N t o t H r E E c H a p t E r s .
The chapter is intended to describe the ordinary
in areas of the machine that can be accessed with the
The second
installation as well as the information necessary for opti-
The third chapter is intended to describe the mainte-
The operations described in the second and third
chapter must be carried out only by the person-
operation from the point of view of electric safety
and health rules.
IDENTIFICATION OF THE MACHINE AND
ITS FEATURES
-
IN CASE OF FAILURE
In most cases, any technical problem can be solved by
please apply to:
N&W GLOBAL VENDING SpA
Via Roma 24
24030 Valbrembo
TRANSPORT AND STORAGE
-
possible to lift the machine by means of a motor-driven
machine and on the side clearly stated by the symbol on
Please avoid:
- dragging the vending machine by means of ropes or
- lifting the vending machine by means of slings or ropes
-
age
Absorbed power
Operating voltage
Model
Product code
Type and quantity of refrigerating gas
Current
Frequency
Serial no.
Type
Fig. 1
To Next Page
Loading...
