© by N&W GLOBAL VENDING S.p.A. 40 12 2008 3335 00
Chapter 3
MAINTENANCE
The maintenance operations described by this chapter
-
Only the parts protected by covers and signalled
remain live inside the machine.
Before removing these covers, detach the machine
from the mains.
The intactness of the machine and its compliance
with the rules of the relative installations shall be
.
SPIRAL TRAYS
PRODUCT SPACER
-
However, leave at least 3 mm between the spacer and
Fig. 25
Product spacer1-
Brackets2-
Adjustment notches3-
Fig. 24
Glassfront1-
Glassfront opening grip2-
Spiral trays3-
S o f t v e n d 4- safety actuator
Current regulator board5-
Actuation board6-
CPU board7-
Graphical display8-
Pre-arrangement of the cashless payment module9-
m u l t i m a x 10- trays
So f t v e n d 11- (optional)
Dispensing compartment12-
Main switch13-
Feet cover14-
To Next Page
Loading...
Need help?
General
