© by N&W GLOBAL VENDING S.p.A. 15 12 2008 3335 00
ELECTRIC CONNECTION
The machine is arranged for electrical operation at a 230
- -
-
omnipolar disconnection from the mains with an open-
-
ing plug shall be located in an accessible position.
requirement and, in case of doubt, to require pro-
-
lation carefully.
-
cross-section
and/or extensions.
THE MANUFACTURER WILL DISCLAIM ALL RE-
SPONSIBILITY FOR ANY DAMAGE CAUSED BY THE
NON-OBSERVANCE OF THE PRECAUTIONS MEN-
TIONED ABOVE
INTERNAL COMPONENTS
composed by two fans, the evaporator, the air conveyor
-
ment system compartment is intended to manage the
Fig. 19
Lift cover1-
Cable clamp2-
Mains cable3-
Fig. 20
Slide-in compartment1-
S o f t v e n d 2- safety actuator
Current regulator board3-
Actuation board4-
CPU board5-
Lock and grip of the slide-in compartment6-
So f t v e n d 7- (optional)
Photocells (optional)8-
Main switch9-
Housing of the product dispensing compartment10-
Cooling unit condenser11-
Ventilation grid12-
Cooling unit evaporator13-
Removable shutters of the cold air grid14-
Cold air distribution grids15-
Tray guides16-
Glassfront opening grip17-
To Next Page
Loading...
Need help?
General
