15
© by NECTA VENDING SOLUTIONS SpA 0407 239 - 00
TECHNICIAN MENU
Using the programming procedures described in this
section, it is possible to set all variables regarding ma-
chine configuration.
The machine is preset to “Technician menu” when press-
ing button from the filler menu.
N.B. By pressing again the button from the technician
menu, the machine will return to “Filler” mode.
The keys “ ” and “ ” scroll through the technician menu
items, which include:
Failures Read Failures
Reset failures
Motor errors
Motors status
Reset motor errors
Program param. Cash Prices
Coin mechanisms
Decimal point
Master/Slave
Bonus
Spirals/select. Spirals
Photocells
Disp comp lock
Cold parameters
Display Language
User messages
Promotional message
Personalised strings
Display counters
Contrast control
Cold paramet. Temperature
Enable cold unit
Enable Food control
Temperature log
Miscellaneous Password
Energy saving
Menu masking
Fluorescent lamps
switched off
Statistics Display Partial
Total
Delete Partial
Total
Display relative Partial
Total
Delete relative Partial
Total
Display at start-up
Print relative Partial
Total
Delete Partial
Total
Test Test selections
Motor test
Autotest
Miscellaneous Machine info Installation date
Machine code
Operator code
Initialising
EVADTS Pass code
Security code
Connection
GSM Pin code
Pre-alarms Thresholds
Counters
Threshold association
Number in bank
To Next Page
Loading...
