Necta Snakky Max - Statistics

22
© by NECTA VENDING SOLUTIONS SpA 0407 239 - 00
STATISTICS
Data on the machine operations is stored in both general
counters and relative counters, which can be reset without
losing total data.
PRINT
Connect an RS232 serial printer having a Baud rate of
9600, 8 data bit, no parity, 1 stop bit to the serial port
located on the push button board to print all of the
statistics, and namely:
Total
1 - counter by single selection;
2 - counter by time bands;
3 - failure counter;
4 - coin mechanism data;
5 - photocell errors;
6 - motor errors;
Relative
1 - counter by single selection;
2 - counter by time bands;
3 - failure counter;
4 - coin mechanism data;
5 - photocell errors;
6 - motor errors;
The hardcopy printout will also contain the machine infor-
mation, and namely:
- date/time of print
- machine name
- software version
- operator code
- machine code
- Installation date.
To connect the printer, do as follows:
- press the confirm print button “ ”, displaying the
message “Confirm?”;
- connect the printer before confirming;
- press the confirm button “ ” to start printing.
DISPLAY
When pressing the confirm button “ ” the data described
in the paragraph “Printing the statistics” is sequentially
displayed.
RESETTING THE STATISTICS
Statistics can be reset for counters globally (all types of
data) or selectively for:
Total
- selections
- failures
- coin mechanism data
- photocell errors;
- motor errors;
Relative
- selections
- failures
- coin mechanism data
- photocell errors;
- motor errors;
Press the confirm button “ ”, and the message “Con-
firm?” starts blinking.
Press the confirm button “ ”, the message “Working” is
displayed for a few seconds and all statistics are reset.
N.B.: when resetting the total statistics also the relative
statistics are reset.
BDV protocol Audit
The information regarding the coin mechanism indicates
the actual currency of:
Audit 1 Money in the tubes
Money present in the change tube that moment
Audit 2 Money to the tubes
Money sent to the change tubes
Audit 3 Money to the box
Money sent to the coin box
Audit 4 Return of change
Total money returned
Audit 5 Dispensed money
Total money dispensed manually
Audit 6 Excess
Excess money. Extra amounts paid by the customer that
were not returned (in the event there was no money
available for return)
Audit 7 Total sales
Total value of sales
Audit 8 Exact change
Value of sales in the “no change” condition.
Audit 9 Mixed dispensing
Total value of dispensing paid differently; for example also
other types of payment (C.P.C., token).
Audit 10 Manual filling
Money inserted in the coin mechanism through the manual
filling function.