VP1006-200PM-00 OEM ISO Reader Manual version 2.6
Manual version 2.0 / January 2008
Manual version 2.1 / September 2009
Chapter 7 : error codes 01 and 02 changed
Appendix E : shielding changed
Appendix F : shielding changed
Manual version 2.2 / 2-2012
Introduction : FCC tekst changed IC added
Appendix A : CE document added
Appendix C : Display changed to last software status
Manual version 2.3 / 4-2012
Neutrodynisation added, available since firmware 2.11.007
Chapter 6.2 : Neutrodynisation added
Appendix C : Display menu option Neutrodynisation added
Appendix I : Neutrodynisation unit between two antennas
Manual version 2.4 / 10-2013
Appendix C : Display menu option ISO protocol added
Manual version 2.5 / 06-2015
Appendix A : Updated product specifications
Manual version 2.6 / 06-2017
Updated FCC_IC Statement
This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; its publication conveys no
license under any patent or other right, nor does the publisher assume liability for any consequence of its use; specifications and
availability of goods mentioned in it are subject to change without notice; it is not to be reproduced in any way, in whole or in
part, without the written consent of the publisher.
© Nedap N.V., Livestock Management P.O. Box 104 NL-7140 AC GROENLO The Netherlands
To Next Page
Loading...
