VP1006 OEM ISO Reader
Contents
1 Introduction 1
2 Description and functioning 3
3 Safety 3
4 Installation 3
4.1 Mounting 3
4.2 Connections 4
5 Adjustments 5
5.1 Check after power up 5
5.2 Communication bus termination jumper 5
5.3 Address 6
5.4 Antenna 6
5.5 Antenna tuning with EWA antenna transformer 7
5.6 Software setup 7
6 Advanced 8
6.1 Testing inputs and outputs 8
6.2 Advanced antenna adjustment 9
6.3 Identification test options 10
7 Trouble shooting 11
8 Maintenance, cleaning and disposal 11
Appendix A: Specifications / CE 12
Appendix B: Display and push button 14
Appendix C: Overview display menu 15
Appendix D: LED indicator overview 17
Appendix E: RS485 connections with separated wiring 18
Appendix F: RS485 connections with Nedap Velos cable 19
Appendix G: RS232 connections 20
Appendix H: VP1006 connected to a Velos VP8001 (VPU) 21
Appendix I: Neutrodynisation unit between two antennas 22
To Next Page
Loading...
