FilterBox
EN
3Description
3.1Function
FilterBox filters out pollutants such as fumes and dust, class W3. Moreover it filters out welding fumes contain-
ing CMR (carcinogenic mutagenic reprotoxic) substances, e.g. generated by welding high alloyed steels or weld-
ing consumables with more than 5 % (Cr, Ni).
NOTE!
Gases are not filtered out.
FilterBox is a flexible, modular system that is available in different configurations. There are three main levels
of automation: FilterBox M, FilterBox A/A+ or FilterBox eQ/A++.
Models Features
FilterBox M
• FilterBox 10 M
• FilterBox 12 M
• FilterBox Twin
• FilterBox Wall
• Manual filter cleaning with a mechanical crank.
• Audible alarm when the filter needs to be changed.
• Hood light (optional).
FilterBox A/A+
• FilterBox 10 A/A+
• FilterBox 12 A/A+
• FilterBox Twin
• FilterBox Wall
• Automatic filter cleaning.
• LCD display.
• Ability to connect a power sensor clamp to auto-
matically start the fan.
• Light and ON/OFF fan switch in the hood (optional).
FilterBox eQ/A++
• FilterBox 10 eQ/A++
• FilterBox 12 eQ/A++
• Outlet (1-phase) for electrical tools.
• An outlet for compressed air tools.
• Light and ON/OFF fan switch in the hood (optional).
• Ergonomic handles.
Connection of Nederman extraction arms is prepared. The Wall model can be connected to a duct system.
NOTE!
The FilterBox does not have any connections for channeling of exhaust air. Pressure drop for complete
system shall be considered by the installation designer or the user.
24