Nelson N800iTM - Page 81

Stud welding unit N800i
As of 24.08.2021
Manual part number: BE 1221
78
Tucker GmbH, Mail / Post: Max-Eyth-Str.1, 35394 Gießen, Germany
F
code
Description
Possible Values
Default
Unit
Notes
F14
Stud feed normal
le- vel
NORMAL
CLOSED, NOR-
MAL OPEN
NORMAL
OPEN
x
This only applies when stud feed is enabled.
F15
Stud feed style
AFTER CON-
TACT BREAK,
AFTER WELD
AFTER
CONTACT
BREAK
x
When to get the signal. This only applies when stud feed is
enabled.
F16
Stud feed on air
trigger
OFF ON
OFF
x
To feed a stud even when triggering the gun while not welding.
This only applies when stud feed is enabled.
F17
Loadbank enable
OFF ON
OFF
x
For manufacturing. This is a read-only function used for burn-in
testing.
F18
Capacitor v-f Rea-
dings
0-65535
NA
Hz
Time-up/down to see both sides