Need help?Do you have a question about the NeoDen 4 and is the answer not in the manual?
Overview of the NeoDen4 pick and place machine, its features, and design.
Detailed diagram and labeling of the NeoDen4 machine's physical parts.
Step-by-step visual guide of the machine's operational sequence.
Outline of the process for creating software programs for PCB production.
Detailed guide to editing interface settings, PCB feeding, mark points, and feeders.
Process of loading and initiating a programmed file for production.
Testing placement head, rails, hose control, and feeders for proper function.
Configuration of factory defaults, feeder, feed, peel, and system parameters.
Steps for initial testing and validation before production.
Guidelines and procedures for running continuous SMT production.
Diagrams and descriptions of the machine's physical components and layout.
Guidance on routine maintenance, troubleshooting, and preventing malfunctions.
General| Model | NeoDen 4 |
|---|---|
| Placement Head Quantity | 4 |
| Min PCB Size | 50mm x 50mm |
| Power Supply | 220V, 50/60Hz |
| Placement Speed | 5000 cph |
| Component Size | 0402 |
| Feeder Capacity | 8mm, 12mm, 16mm |
| Software | NeoDen Software |
| Type | Pick and Place Machine |
To Next Page