nozzle.
Head move, after click this option, you will enter into”head move”page, click to move
(Overall Workbench) you can test to move in a wide range.
4.3.2.Rail control
Function, test rail PCB feeding,forward PCB feeding, backward PCB feeding and feeding speed
4.3.3.Hose control
Function, test each function key
Start button status, on the left side of machine, it has one start button, press this button the
status will change
Vibration feeder, after select this option, vibration tray will vibrate
Up looking camera light, after click the light will turn on
To Next Page
Loading...