Understanding the External Battery Charger Status
The following table defines the external battery LED indicators.
LED Indicates
Red, yellow, green or OFF Startup initialization when applying power.
OFF No battery inserted.
Yellow Battery charging.
Solid green Battery charged successfully.
Red Error.
Table 5 – Battery LED Indicators
Battery Disposal and Recycling
Call2Recycle
®
at 1-800-822-8837 handles battery disposal and recycling. Customers are
encouraged to contact Call2Recycle to find their nearest drop-off location for proper disposal
and recycling.
Pairing the Trimble
®
Nomad
®
to the R900
®
BCT through Bluetooth
Complete these steps only if you are pairing the Nomad to the R900BCT for the first time.
1. Power ON the R900BCT and set to Normal Node, if not already set. See "Understanding
the R900® BCT Modes" on page3.
2.
On the Nomad, click .
3.
Click
– UTILS.
4.
Click
– Belt Clip Status.
The AMR Connection screen appears. The R900BCT is visible in the Broadcasting Device
drop-down selection list.
5. Choose the device from the drop-down selection list and click Bluetooth.
The R900BCT Status screen now displays the device details:
l If you have previously paired a device, go to the R900BCT Status screen not the AMR
Connection screen.
l To Change Devices, click this option on the bottom of the R900BCT Status screen.
You then see the AMR Connection screen and can choose the device from the drop-
down selection list.
R900
®
Belt Clip Transceiver Users' Guide 7
Chapter 2: Using the R900
®
BCT
To Next Page
Loading...
Need help?
General
