Prodigio service manual Version 1.0 en
18
OPERATION
4 OPERATION
4.1 General information
For an overview of operational controls see “Main components” on page 7.
For basic operation of the machine such as preparing a coffee and other related infor-
mation, refer to the user manual.
4.2 Status indications
4.2.1 Status indication of coffee machine
According to the following table the status of the coffee machine is shown by
- light signals of the 3 coffee buttons Lungo, Espresso and Ristretto (white LEDs)
- maintenance light (M-light, orange LED)
- Nespresso logo backlight (N-light, white LED)
Machine status Lungo Espresso Ristretto M-light N-light
Off or standby
Off Off Off Off Off
Heating up
Blinking, 1 Hz Blinking, 1 Hz Blinking, 1 Hz — —
Ready
On On On — —
Brewing coffee
One coffee button is blinking, 1 Hz — —
Pre-order active
Programming
coffee cup size
Special functions
Programming
cup size confir-
mation for
-Lungo
Off On, 0.5 sec On, 0.5 sec — —
- Espresso
On, 0.5 sec Off On, 0.5 sec — —
- Ristretto
On, 0.5 sec On, 0.5 sec Off — —
Descaling ready,
pump on/off
Blinking, 2 Hz Blinking, 2 Hz Blinking, 2 Hz On —
Emptying
confirmation
Off On, 0.5 sec Off On —
Emptying
running
Off Off Off On —
Switch standby
time to 30 min
Off On, 3 x 0.5 sec Off Off —
- to 9 min
Off On, 0.5 sec Off Off —
Reset to factory
settings
On, 2 sec On, 2 sec On, 2 sec On, 2 sec On, 2 sec
Nespresso App. related
First pairing
Off Off Off Off Blinking,
3 x 0.5 sec
Low capsule
stock
————On
To Next Page
Loading...
