Nescafe C70 - Remove Print Cover

Version 1.0 en Prodigio service manual
51
REPAIRS
7.4.9 Remove print cover
1. Check position of ratchets (4) for reassembly.
2. Release 4 latches (2 on each side) with screwdriver and remove print cover (5)
from chassis (6).
3. Remove light guides (56, 57, 58) from print cover if necessary.
Assembly checkpoint
• Align ratchets (4) on print cover (5) before assembly.
4
5
6
57
56 58
Handle with care!
Ratchets (4) can drop
from the print cover and get
lost.
Incorrect positioned
ratchets (4) will block
the slider in the blind (2).