Prodigio service manual Version 1.0 en
44
REPAIRS
7.4.3 Remove front cover
• Reach into circular opening and release 2 latches of front cover (encircled).
• Swing out front cover (64) at the bottom until it touches the drop stop (7).
• Press up drop stop and continue swivelling the front cover (64) until the 2 hinges on
its top are released.
Assembly hint
• Insert both hinges on top of front cover (64) into counterparts on blind (2) first.
• Then swivel front cover downwards over drop stop (7) and snap it into place.