Nescafe C70 - General Disassembly; Prepare Coffee Machine for Disassembly

Prodigio service manual Version 1.0 en
42
REPAIRS
7.4 General disassembly
This subchapter shows all necessary disassembly steps to gain access to the main
assembly (slider unit, brewing unit, thermoblock, pump and electronic device).
7.4.1 Prepare coffee machine for disassembly
1. Check and remove any capsule from the brewing unit. Close the slider.
2. Empty the water system if hoses have to be detached for repair (see “Empty water
system” on page 31).
3. Disconnect power plug and let coffee machine cool down.
4. Remove all detachable parts from coffee machine:
Drip tray with cup support and drip grid, used capsule container, water tank with lid
and milk frother (Prodigio&milk only).
1
3
4
Close brewing unit if
drop stop (7) has to
be removed (see page 47).