Nescafe C70 - Page 21

Version 1.0 en Prodigio service manual
21
OPERATION
6 Emptying mode
(evaporing)
• When slider is open
press and hold the
Ristretto and Lungo
coffee buttons
together for at least
6 sec. The other
coffee button flashes
for confirmation.
• Close the slider to
start the procedure.
1) Start pump
2) Heat up thermo-
block to 105 °C
(100% power)
3) Stop pump when
thermoblock tem-
perature of 105 °C
is reached
4) Switch off ther-
moblock
5) Switch off machine
6) Block machine for
10 min
Switch off machine
7 Resetting mode
• Switch off machine.
• Press and hold the
Espresso and Lungo
coffee buttons
together for at least
4sec.
• Reset programmed
volumes to factory
settings (Ristretto
25ml, Espresso
40ml, Lungo 110ml)
• Reset automatic off
mode to 9 min.
• Reset water hard-
ness to "hard".
• Reset capsule
counter and
descaling counter
• Cancel pairing with
Nespresso App.
device
• Activate Bluetooth
®
Proceeds with self test
mode automatically
8 Auto switch off mode
(factory setting of 9 min
can be changed to
30 min)
• Automatically after a
certain period of non-
use.
• Manually at any time
by pressing Lungo
and Espresso coffee
buttons together for
more
than 3 sec .
• Change automatic
OFF mode between
9 and 30 minutes:
Ensure machine is
turned off.
Press and hold Lungo
and Ristretto coffee
buttons together for
at least 3 sec.
• Switch off machine
after 9 min resp.
30 min if no coffee is
brewed or 9 min
resp. 30 min after
last brewed coffee
9 Failure mode
Automatically by fol-
lowing failures:
a) NTC short circuit
b) NTC not connected
c) Heat up too slow
d) Motor short circuit
e) Motor not connected
Machine indicates fail-
ure with blinking main-
tenance light as long as
the failure is present
When failure is fixed
Machine mode Enter mode Actions Exit mode