Nescafe C70 - Page 53

Version 1.0 en Prodigio service manual
53
REPAIRS
• If necessary turn pivot top (17) to gain access to the cable bracket (18).
• Remove the cable bracket (18) with a screwdriver.
• To remove the connection cable (48):
• Unplug both insulated angled Faston receptacles with the help of a screwdriver
or pointed pliers from electronic module (see lower detail).
• Unplug Faston receptacle of protective earth cable from thermoblock (35) - see
upper detail.
Assembly checkpoint
• Never re-use a damaged connection cable (48).
Do not try to remove
the cable bracket (18)
from the underside of the
coffee machine. The cable
bracket will then probably
be destroyed.
The cable bracket is
hooked at one side.
Place screwdriver like
shown in detail.
18
17
The cable bracket
(18) is under tension.
Therefore, fix the cable
bracket with your finger
when unlatching it.
48
35
Caution - fragile
insulation on Fas-
ton receptacles.
Handle with care if con-
nection cable (48) is to be
re-used.