Nescafe C70 - Page 61

Version 1.0 en Prodigio service manual
61
REPAIRS
• Press together flowmeter clips (see detail) and remove flowmeter (22) from main
board (23).
Assembly checkpoints
• Never re-use a flowmeter (22). Always assemble a new flowmeter.
• In case main PCB and MMI PCB have to be replaced together:
• Replace first PCB only.
• Plug in and switch on coffee machine. Wait for a short time.
• Then switch off and unplug coffee machine.
• Continue with repair and replace second PCB.
• Check if pairing is still possible after repair.
• When assembling electronic module, check orientation of back cover (82) to main
PCB (23) and front cover (81).
22
23
The flowmeter clips
get damaged during
disassembly.
81
82
23
If back cover (82) is
mounted upside
down it will block the swivel
arm.