Net2Edge Liberator 44 Series - Page 2

LIB-4400/4424 Installation Guide
| MANUAL Page 2 of 65
Trademarks
All trademarks and registered trademarks are the property of their respective owners.
Copyright Notice/Restrictions
Copyright © 2012- 2017 Net2Edge Ltd.
All rights reserved.
No part of this work may be reproduced or used in any form or by any means (graphic,
electronic or mechanical) without written permission from Net2Edge Limited.
The information contained herein is confidential property of Net2Edge Limited. The use,
copying, transfer or disclosure of such information is prohibited except by express written
agreement from Net2Edge Limited.
Contact Information:
Net2Edge Limited
Kulite House,
Stroudley Road,
Basingstoke
RG24 8UG
United Kingdom
Tel: +44 345 0130030
Revision History
Rev
Date
Description
A
09/04/13
Initial release for LIB-4400 software version v 1.6.
B
11/25/13
Revised for LIB-4400 software version v 1.7 and adds and LIB-4424.
C
01/02/14
Add DoC (Declaration of Conformity).
D
05/27/14
Updated PS fuse, marking, and mounting information.
E
03/05/15
Revised for software v 1.9. Adds ZTP Auto Discovery Mode,
Performance Monitoring, and Link Fail-over.
F
12/05/2017
Re-Branded Manual