LIB-4400/4424 Installation Guide
| MANUAL Page 3 of 65
Cautions and Warnings
Definitions
Cautions indicate that there is the possibility of poor equipment performance or potential damage to
the equipment. Warnings indicate that there is the possibility of injury to a person.
Cautions and Warnings appear here and may appear throughout this manual where appropriate.
Failure to read and understand the information identified by this symbol could result in poor
equipment performance, damage to the equipment, or injury to persons.
Cautions
Do not ship or store devices near strong electrostatic, electromagnetic, magnetic, or
radioactive fields.
Caution: When handling the LIB-4400 observe electrostatic discharge precautions. This requires
proper grounding (i.e., wear a wrist strap).
Caution: Copper based media ports, e.g., Twisted Pair (TP) Ethernet, USB, RS232, RS422, RS485,
DS1, DS3, Video Coax, etc., are intended to be connected to intra-building (inside plant) link
segments that are not subject to lightening transients or power faults. They are not to be connected
to inter-building (outside plant) link segments that are subject to lightening.
Caution: Do not install the LIB-4xxx in areas where strong electromagnetic fields (EMF) exist. Failure
to observe this caution could result in poor LIB-4xxx performance.
Caution: Read the installation instructions before connecting the chassis to a power source. Failure
to observe this caution could result in poor performance or damage to the equipment.
Caution: Only trained and qualified personnel should install or perform maintenance on the LIB-
4xxx. Failure to observe this caution could result in poor performance or damage to the equipment.
Caution: Do not let optical fibers come into physical contact with any bare part of the body since
they are fragile, and difficult to detect and remove from the body.
To Next Page
Loading...