NETGEAR A7000

Get Started and Connect to a WiFi Network
10
A7000 WiFi USB Adapter
Insert the Adapter With a Desktop Dock
We recommend that you do not use another cable to connect the adapter to the USB port on
your computer. Use the desktop dock with the attached cable that is supplied in the package.
Using another USB cable might affect the performance and correct functioning of the adapter.
 To use the adapter with desktop dock:
1. Place the adapter into the dock.
2. Connect the USB cable to the USB port on your computer
.
3. Fold out the adapter to its maximum angle for increased WiFi performance.
Insert the Adapter Without a Desktop Dock
 To use the adapter without the desktop dock:
1. Insert the adapter into a USB port on your computer
.
2. Move the antenna to a 90-degree angle for increased WiFi performance.