Reference Manual for the ADSL Firewall Router DG834
-20
202-10005-05, June 2005
b.
Click on the Security Policy subheading to show the Security Policy menu.
Figure B-17: Security Policy Editor security policy
c.
Select the Main Mode in the Select Phase 1 Negotiation Mode check box.
4. Configure the VPN Client Identity.
In this step, you will provide information about the remote VPN client PC. You will need to
provide:
— The Pre-Shared Key that you configured in the DG834.
— Either a fixed IP address or a “fixed virtual” IP address of the VPN client PC.
To Next Page
Loading...
