NETGEAR FVS124G User Manual

When you are prompted for your pre-shared key:
17
➊
‣
Pre-shared key: Enter the pre-shared key that you configured on the
NETGEAR device ➊
‣
Optionally, check the box “Store in Keychain” to save the password in your
keychain so you are not asked for it again when connecting the next time
‣
Click “OK”
‣
If the slider goes back to Off after starting the connection, or after entering your pre-shared
key, please read the Troubleshooting section of this document
‣
If the slider goes to On and turns blue after a while, you have successfully established a
connection
Congratulations!

NETGEAR FVS124G Specifications

Power

power requirements	12V DC, 1.2A

System Memory

processor	200 MHz 32-bit RISC
memory	4MB Flash, 16MB DRAM

Ports & Interfaces

LAN ports	Four (4) 10/100/1000 Mbps auto-sensing, AutoUplink RJ-45 ports
WAN ports	Two (2) 10/100Mbps Ethernet RJ-45 ports

Weight and Dimensions

dimensions	7.45 x 4.85 x 1.26 in. (18.92 x 12.31 x 3.19 cm)
weight	1.37 lbs. (0.62 kg)