NETGEAR FVS124G User Manual

Important Prerequisites
Your NETGEAR Device
This document applies to the following NETGEAR devices
‣
FVS124G
The documentation is based on firmware 1.1.48.
Your Mac
‣
Make sure to use a recent VPN Tracker version. The latest VPN Tracker release can be obtained from http://
www.vpntracker.com
‣
You will need one VPN Tracker license for each Mac running VPN Tracker
5
Tip If you are setting up VPN on your device for the first time, we strongly recommend you start out with the tutorial-
style setup in the first and second part of this document, and only additional features to your connection once you
have the basic setup working.

NETGEAR FVS124G Specifications

Power

power requirements	12V DC, 1.2A

System Memory

processor	200 MHz 32-bit RISC
memory	4MB Flash, 16MB DRAM

Ports & Interfaces

LAN ports	Four (4) 10/100/1000 Mbps auto-sensing, AutoUplink RJ-45 ports
WAN ports	Two (2) 10/100Mbps Ethernet RJ-45 ports

Weight and Dimensions

dimensions	7.45 x 4.85 x 1.26 in. (18.92 x 12.31 x 3.19 cm)
weight	1.37 lbs. (0.62 kg)