NETGEAR FVS124G User Manual

My NETGEAR Configuration
Throughout this guide, there are certain pieces of information that are needed later on for
configuring VPN Tracker. This information is marked with red numbers to make it easier to
reference it later. You can print out this form to help keep track of the various configuration
settings of your NETGEAR device.
➊ Pre-Shared Key:
➋ NETGEAR’s Local Identifier:
➌ NETGEAR’s Remote Identifier:
➍ WAN IP Address: . . . (or DNS host name )
➎ LAN IP Address: . . .
➏ LAN Subnet Mask: . . .
➐ LAN Network Address (calculated, see page 12 ): . . .
➑ VPN Policy Name: !
8

NETGEAR FVS124G Specifications

Power

power requirements	12V DC, 1.2A

System Memory

processor	200 MHz 32-bit RISC
memory	4MB Flash, 16MB DRAM

Ports & Interfaces

LAN ports	Four (4) 10/100/1000 Mbps auto-sensing, AutoUplink RJ-45 ports
WAN ports	Two (2) 10/100Mbps Ethernet RJ-45 ports

Weight and Dimensions

dimensions	7.45 x 4.85 x 1.26 in. (18.92 x 12.31 x 3.19 cm)
weight	1.37 lbs. (0.62 kg)