NETGEAR FVS124G User Manual

Introduction 4........................................................
Important Prerequisites 5.........................................................
Scenario 6................................................................................
Terminology 7..........................................................................
My NETGEAR Configuration 8.............................
Task 1 – Configure your NETGEAR 9..................
Step 2 –"Retrieve your NETGEAR’s LAN and WAN Configuration
11
Step 3 –"Create a new VPN Policy 12.....................................
Task 2 – Configure VPN Tracker 14.....................
Step 1 - Create a New Connection 14.....................................
Step 2 – Configure the VPN Connection 15............................
Task 3 –"Test the VPN Connection 16..................
It‘s time to go out! 16...............................................................
Start your connection 16..........................................................
Supporting Multiple Users 18...............................
Using Mode Config for IP Address Assignment 18..................
Adding more VPN Tunnels 22.................................................
Troubleshooting 24...............................................
VPN Connection Fails to Establish 24.....................................
Cannot Access Resources on the Remote Network 25.........
Further Questions? 26.............................................................
VPN Settings Explained 27..................................
IKE Policy 27...........................................................................
VPN Policy 30..........................................................................
The Role of the Local Address in VPN Tracker 33..................
3

NETGEAR FVS124G Specifications

Power

power requirements	12V DC, 1.2A

System Memory

processor	200 MHz 32-bit RISC
memory	4MB Flash, 16MB DRAM

Ports & Interfaces

LAN ports	Four (4) 10/100/1000 Mbps auto-sensing, AutoUplink RJ-45 ports
WAN ports	Two (2) 10/100Mbps Ethernet RJ-45 ports

Weight and Dimensions

dimensions	7.45 x 4.85 x 1.26 in. (18.92 x 12.31 x 3.19 cm)
weight	1.37 lbs. (0.62 kg)