NETGEAR FVS124G User Manual

Task 3 –"Test the VPN Connection
This section explains how to start and test your VPN connection.
It‘s time to go out!
You will not be able to test and use your VPN connection from within the internal network that you want to connect to. To
test your connection, you will need to connect from a different location. For example, if you are setting up a VPN
connection to your office, test it from home. If you are setting up a VPN connection to your home network, test it from an
Internet cafe, or go visit a friend.
Start your connection
!
16
‣
Connect to the Internet
‣
Make sure that your Internet connection is working –"open your Internet browser and try to
connect to http://www.equinux.com
‣
Start VPN Tracker if it’s not already running
‣
Slide the On/Off slider for the connection you have just configured to On

NETGEAR FVS124G Specifications

Power

power requirements	12V DC, 1.2A

System Memory

processor	200 MHz 32-bit RISC
memory	4MB Flash, 16MB DRAM

Ports & Interfaces

LAN ports	Four (4) 10/100/1000 Mbps auto-sensing, AutoUplink RJ-45 ports
WAN ports	Two (2) 10/100Mbps Ethernet RJ-45 ports

Weight and Dimensions

dimensions	7.45 x 4.85 x 1.26 in. (18.92 x 12.31 x 3.19 cm)
weight	1.37 lbs. (0.62 kg)