NETGEAR GC110 Hardware Installation Guide

3
Applications
The switch is designed to provide flexibility in configuring network connections. The
switch can be used as your only network traffic–distribution device for PoE (on model
GC110P) and non-PoE devices or with 10 Mbps, 100 Mbps, and 1 Gbps Ethernet and
fiber hubs, routers, and switches.
This chapter includes the following sections:
• PoE applications
• Desktop switching
18

NETGEAR GC110 Specifications

General

Switch type	Managed
Quality of Service (QoS) support	Yes
Console port	RJ-45
Power connector	DC-in jack
SFP module slots quantity	2
Installed SFP modules quantity	-
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
Product color	Gray
10G support	No
MAC address table	- entries