NETGEAR GC110 Hardware Installation Guide

•
Wall-mounting screws
•
Installation guide
•
Rubber footpads for tabletop installation
5.
If any item is missing or damaged, contact your local NETGEAR reseller for
replacement
Step 4: Install the switch
You can install the switch on a flat surface or attach it to a wall.
You can also use any off-the-shelf 75 mm VESA standard mount to secure the switch to
a wall, a pole, or another surface.
Install the switch on a flat surface
The switch ships with four self-adhesive rubber footpads.
To install the switch on a flat surface:
Stick one rubber footpad on each of the four concave spaces on the bottom of the
switch.
The rubber footpads cushion the switch against shock and vibrations. They also
provide ventilation space between stacked switches.
Wall-mount the switch
The bottom panel of the switch provides four VESA mount holes that allow you to mount
the switch to a wall. The switch ships with wall-mount screws and anchors that you can
secure to a wall and attach the switch to. Although you could use only two screws, we
recommend that you use four screws for greater stability.
Hardware Installation Guide27Installation
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports

NETGEAR GC110 Specifications

General

Switch type	Managed
Quality of Service (QoS) support	Yes
Console port	RJ-45
Power connector	DC-in jack
SFP module slots quantity	2
Installed SFP modules quantity	-
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
Product color	Gray
10G support	No
MAC address table	- entries