NETGEAR GC110 Hardware Installation Guide

Contents
Chapter 1 Introduction
Overview................................................................................................6
Features.................................................................................................8
Safety instructions and warnings........................................................9
Chapter 2 Hardware Overview
Hardware description........................................................................13
Front panel......................................................................................13
Back panel.......................................................................................13
LEDs.................................................................................................15
Switch hardware interfaces...............................................................16
RJ-45 ports for 10/100/1000M BASE-T Ethernet connectivity..16
SFP ports for fiber connectivity....................................................16
Multi-function Reset button..........................................................17
Chapter 3 Applications
PoE applications.................................................................................19
PoE overview..................................................................................19
Connect PoE equipment in a business environment................19
Connect PoE equipment for surveillance and security.............20
Desktop switching..............................................................................21
Chapter 4 Installation
Step 1: Prepare the site......................................................................24
Step 2: Protect against electrostatic discharge..............................24
Step 3: Unpack the switch.................................................................25
Step 4: Install the switch....................................................................27
Install the switch on a flat surface.................................................27
Wall-mount the switch...................................................................27
Wall-mount the switch vertically..............................................28
Wall-mount the switch horizontally.........................................30
Mount the switch to a pole or another surface..........................31
Optional Step 5: Install SFP transceiver modules...........................32
Step 6: Connect devices to the switch.............................................32
Step 7: Check the installation...........................................................33
Step 8: Apply power and check the LEDs.......................................33
3

NETGEAR GC110 Specifications

General

Switch type	Managed
Quality of Service (QoS) support	Yes
Console port	RJ-45
Power connector	DC-in jack
SFP module slots quantity	2
Installed SFP modules quantity	-
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
Product color	Gray
10G support	No
MAC address table	- entries