NETGEAR GC110 Hardware Installation Guide

Hardware description
The following sections describe the switch hardware features.
Front panel
The front panel does not contain any components other than two LEDs: The upper LED
is the Cloud Connection LED and the lower LED is the Power LED (see LEDs on page
15).
Figure 1. Front panel
Back panel
Model GC110 provides eight 10/100/1000BASE-T RJ-45 ports and two dedicated
Gigabit SFP fiber ports.
Model GC110P provides eight 10/100/1000BASE-T RJ-45 PoE ports and two dedicated
Gigabit SFP fiber ports.
Both models require DC power and come with an external power adapter.
The following figures show the back panels.
Figure 2. Back panel model GC110
Hardware Installation Guide13Hardware Overview
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports

NETGEAR GC110 Specifications

General

Switch type	Managed
Quality of Service (QoS) support	Yes
Console port	RJ-45
Power connector	DC-in jack
SFP module slots quantity	2
Installed SFP modules quantity	-
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
Product color	Gray
10G support	No
MAC address table	- entries