NETGEAR GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch User Manual

GS700TS Smart Switch Software Administration Manual
Managing Security 6-7
v1.0, June 2009
• Single Connection – Select whether a single open connection between the host
Authentication Port and the TACACS+ server is enabled or disabled. The possible field
values are:
– Enable – Enables a single connection.
– Disable – Disables a single connection.
• Active – Select whether this server is the Primary or Backup TACACS+ server used for
authentication. The possible values are:
– Primary – Defines the TACACS+ server as the Primary Server.
– Backup – Defines the TACACS+ as the Backup Server.
2. Select the TACACS+ server entry.
3. Enter the Host IP Address, Key String, Authentication Port and Timeout for Reply in the
provided fields in the first row.
4. Select the Single Connection status and Active server from the lists in the provided fields in
the first row.
5. Click APPLY to update the device.
To add a new TACACS+ server entry:
1. Click Security > Management Security > TACACS+. The TACACS+ screen displays.
2. Enter the Host IP Address, Key String, Authentication Port and Timeout for Reply in the
provided fields in the first row.
3. Select the Single Connection status and Active server from the lists in the provided fields in
the first row.
4. Click ADD to update the device.
To remove a TACACS+ server entry:
1. Click Security > Management Security > TACACS+. The TACACS+ screen displays.
2. Select the TACACS+ server entry.
3. Click DELETE to remove the entry.

NETGEAR GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch Specifications

General

Brand	NETGEAR
Model	GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch
Category	Switch
Language	English