GS700TS Smart Switch Software Administration Manual
Monitoring the Switch 7-16
v1.0, June 2009
To remove a history control entry:
1. Click Monitoring >RMON > Advanced > History Control. The RMON History Control
screen displays.
2. Select the history control entry.
3. Click DELETE to remove the history control entry.
History Table
The RMON History Table screen contains interface specific statistical network samples. Each
table entry represents all counter values compiled during a single sample.
To view the RMON History Table:
1. Click Monitoring > RMON > Advanced > History Table. The RMON History Table screen
displays:
The RMON History Table screen contains the following fields:
History Entry
• History Entry No. – Select the entry number for the History Control Table screen.
• Owner – Displays the RMON station or user that requested the RMON information. The
field range is 0-20 characters.
History Table
• Sample No. – Displays the sample number from which the statistics were taken.
• Drop Events – Displays the number of dropped events that have occurred on the interface
since the device was last refreshed.
Figure 7-9
To Next Page
Loading...
