NETGEAR GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch

GS700TS Smart Switch Software Administration Manual
Monitoring the Switch 7-22
v1.0, June 2009
5. Select the Sample Type from the list in the provided field in the first row.
6. Select the Startup Alarm from the list in the provided field in the first row.
7. If you selected Rising Alarm or Rising and Falling as the Startup Alarm, enter the Rising
Threshold and select the Rising Event number in the provided fields in the first row.
8. If you selected Falling Alarm or Rising and Falling as the Startup Alarm, enter the Falling
Threshold and select the Falling Event number in the provided fields in the first row.
9. Enter the Interval and Owner in the provided fields in the first row.
10. Click APPLY to update the device.
To add an alarm entry:
1. Click Monitoring > RMON > Advanced > Alarms. The RMON Alarms screen displays.
2. Select the Counter Name from the list of MIB variable values in the provided field in the first
row.
3. Enter the Interface in the provided field in the first row.
4. Select the Sample Type from the list in the provided field in the first row.
5. Select the Startup Alarm from the list in the provided field in the first row.
6. If you selected Rising Alarm or Rising and Falling as the Startup Alarm, enter the Rising
Threshold and select the Rising Event number in the provided fields in the first row.
7. If you selected Falling Alarm or Rising and Falling as the Startup Alarm, enter the Falling
Threshold and select the Falling Event number in the provided fields in the first row.
8. Enter the Interval and Owner in the provided fields in the first row.
9. Click ADD to update the device.
To remove an events control entry:
1. Click Monitoring > RMON > Advanced > Alarms. The RMON Alarms screen displays.
2.
Select the alarm entry.
3. Click DELETE to remove the alarm entry.